Automotive Connoisseur Group is an authorized, exclusive REVO dealer in greater San Deigo area. We can answer any questions you may have about REVO products and provide you with an excellent price and over the top service.
There are several strong points about the REVO flash tunes:
- We can install a trial version of this tune on your car. With the trial version you get to enjoy the full capability of the tune in your car for 5 hours of driving time. Once the trial is expired, the car automatically comes back to its 100% stock performance like it came from the factory. Call us and schedule your free trial!
- The tune is adjustable. After your car is flashed, we can adjust a number of parameters to fine-tune your car to the gasoline type in your area and the average weather. This allows for maximum safety and the ability to run more conservative or aggressive tune.
- REVO performance software is programmed through the vehicles serial port. The whole procedure takes about 30min from the beginning till the end and it does not require you to pull the ECU out of your car.
- An additional optional serial port switch devices gives the user the ability to alter boost, timing and fuel settings within Revo software, to make the most of differing fuel quality and environmental conditions. When purchasing a select or select plus you will enjoy the additional benefits of a built in anti-theft program. The anti-theft modes on these switches allow you to totally disable your vehicle's ECU.
Higher Power | More Torque | Smooth Gains across rev range
Better Fuel Economy | Broader Power Band
REVO Performance Software Options
No matter what bolt-ons you have on your car, REVO software can maximize the performance.
Stage 1 Performance Software
Revo Performance software offers the smoothest and most controllable power increase available for the modern motor vehicle. All of our development is carried out using the standard un-modified car, which has first been diagnostically tested for true factory results. As such the software we tune to, will perform impeccably when re-installed onto an un-modified car.
Most of our performance software is complimented by multiple performance programs, anti theft programs and user friendly variable table changes that become accessible when you purchase an optional Serial Port Switch. This will give you access to many different levels of enhancements built into the Revo performance software. You may want to switch to take advantage of better fuel qualities, or to ensure you are getting the most from any optional bolt on tuning accessories like performance exhaust systems, performance air intake filters or intercoolers. And for the ultimate enthusiast, it allows you to “tune” your vehicle’s fuel, boost and timing settings for maximum performance.
Most Revo software is programmed through the vehicles Serial Port. This allows us to reprogram you’re vehicle without lifting the bonnet, and will be downloaded into your factory ECU in just over 10 minutes!
Stage 2 Performance Software
Revo Stage 2 performance software has been specifically developed to attain the best possible performance from cars with bolt on performance modifications that increase the breathing capabilities of the engine such as a performance exhaust, sports or de cat, intake and intercooler. Typically you can see another 10-15% on top of the gain from stock to stage1. Stage 2 also allows you to run a de-cat or sports cat for race use without getting ‘CAT Efficiency’ error codes or a having CEL (Check Engine Light) come on. It also gives you increased flexibility with settings over stage 1 to make the most of the additional potential from the up-rated hardware.
Stage 2 software isn’t available for all vehicles and requires specific hardware upgrades to function correctly. For availability and details of required hardware specification please consult us for more details.
Revo Stage 2 and Stage 2+ performance software is programmed through the vehicles Serial Port in the same way as Revo Stage 1. This allows us to reprogram you’re vehicle without lifting the bonnet, and can typically be downloaded into your factory ECU in a little over 10 minutes!
Free trial is not available on Revo stage 2 or stage 2+ software.
Stage 2 Performance Software
Revo Stage 3 software has been specifically developed to compliment a proven package of extensive engine modifications. It allows the user to choose one of several turbo charger upgrades in addition to exhaust and intake upgrades. Our Stage 3 tuning is very aggressive and depending on the hardware package you opt for will yield up to 200% power gains over standard horsepower figures*. For this software to run efficiently and reliably, a strict hardware build list must be adhered to. The individual tested components are listed on each specific car’s application pages. The optional Select Plus is highly recommended for this range of software to guarantee the optimal performance gains achievable.
Stage 3 software disclaimers: Revo Stage 3 software has been developed to operate within specific parameters according to manufacturer’s tolerances and aftermarket manufacturer’s hardware specifications. Installing Revo software on vehicles with hardware modifications other than those specified can cause unsatisfactory performance and possible engine damage.
IF YOU HAVE ANY QUESTIONS ABOUT REVO STAGE 3 HARDWARE COMPATABILITY, CONTACT US FOR FURTHER INFORMATION.
Free Trials and Upgrades:
- Revo Stage 3 software is available from your local Revo dealer.
- Revo stage 3 power gains are dependant on specific hardware, settings and fuel quality.
- Revo Stage 3 software is only available for certain model/engine types, please consult your local Revo dealer
The 'select' gives the user the ability to switch between stock and performance mode. This performance mode can be set by your Revo Technik dealer to suit your car, fuel quality and climatic conditions.
Additionally the 'select' features an Anti theft function which is designed to disable the ECU itself. Switch functionality varies for different vehicles.
For further inquiries and more information about REVO Selectn give us a call.
REVO SELECT Plus
The 'select plus' features variable boost, timing and fuel adjustment allowing the user to set the car up to run efficiently with any fuel quality and in varying conditions. The 'select plus' consists of a diagnostic port interface, USB cable and new PC based software. Boost, timing and fuel adjustments can be uploaded directly to the ECU using the software communication mode. The 'select plus' not only features stock and performance modes like the 'select' version, but also includes an additional 3 "user based" modes. These modes allow the user to custom configure their performance settings and upload them to the 'select plus'. Changes to ECU settings can then be made using just the 'select plus'. These saved settings can be changed and re-saved using the software as your mechanical upgrades or environmental conditions permit. Combined with the ability to revert to stock programming, and our unique anti-theft mode, the 'select plus' is unmatched in its ability to provide the highest levels of control and flexibility.
Note: Revo Technik recommends using VAGCOM in conjunction with 'select plus' to allow the user to monitor certain engine sensors to efficiently set the adjustable boost, fuelling and timing settings. Please see the Select Plus Advanced User Guide for further details.
SELECT Plus for Porsche
Select Plus for Porsche has the added benefit of a Data Acquisition function built into the Revo Select Plus software allowing the user to monitor certain engine sensors to efficiently set the adjustable boost, fueling and timing settings. It also gives the user the ability to store up to three preset configurations in the switch or alter settings via the OBDII port.
Anti-Theft Included in select and select plus When purchasing a select or select plus you will enjoy the additional benefits of a built in anti-theft program. The anti-theft modes on these switches allow you to totally disable your vehicle's ECU. It will leave the car totally inoperable even if the thief has the keys. Unlike other security devices there are no mechanical installation requirements such as wiring looms.